Process
What you see at a cut edge
The body is tinted to match the face; the surface detail is printed.
Mitres, waterfall edges and sink cut-outs all show the body. Ours is tinted to match the face, so cut edges keep the look.
Printed surface detail
A thin, digitally printed layer adds the fine veining you see on the face.
Tinted body
The body is tinted to match the face, so a cut edge echoes the design instead of showing a plain white core.
Compare
Five routes to a luxury-stone look
See how each route compares on the face, the cut edge and fabrication.
| Route | Face | Cut edge | Good to know |
|---|---|---|---|
| Natural luxury stone | Natural | Natural | Every slab differs; price and supply depend on the quarry and the block. |
| Sintered stone and porcelain slabs | Digitally printed, high detail | Body usually a plain tone | Hard, thin panels; mitres and edge repairs need specialist handling. |
| Conventional quartz | Granules and broad veins | Same mix as the face | Fine luxury-stone veining is hard to reproduce. |
| Surface-printed quartz | Digitally printed, high detail | Plain core at cuts | Sink cut-outs, mitres and waterfall edges expose the core. |
| Eterna Stone | High-detail digital print | Body tinted to match the face | Made for countertops, islands, vanities and walls. |
Category descriptions are general and do not refer to any specific brand or supplier.
Color
Color management by measurement
For each ink set and board we print measurement charts, read every patch with a spectrophotometer and build a color model from the spectra. Designs are converted through that model, not tuned by eye on a screen.
Colors are matched for a specified viewing light. Under other lights any printed surface can shift, so production is matched to the physical proof you approve.
Veining that meets at the joint
A bookmatched pair lets the pattern continue across a joint on walls and wide tops. Ask for bookmatched slabs when you request a quote.
Request a quote
Three details get you a price.
Destination port, monthly volume and timing. We reply within one working day.
- 01Destination port Where the container goes, for example Jebel Ali or Port Klang.
- 02Monthly volume In square meters or number of slabs.
- 03Timing When you need the first container.